![]() > From the Selected Component pane, drag the AC Power Connector (Male) to a battery backup outlet on the top of the UPS. > Under Partial Connections for the computer, select the power cord. Plug the computer and monitor in to the appropriate power outlets. > Click the power button on the UPS to turn it on. > From the Selected Component pane, drag the power plug to a power outlet on the wall plate. Do the computer and monitor still have power?Īdd a UPS to the Workspace, plug it in, and power it on. > Power on the monitor and then the computer. > Connect the USB cable to the UPS and the computer. The cable from the wall connects to the IN port. > Connect the network cables through the UPS to the computer. > Plug the printer in to the appropriate UPS outlets. > Plug the computer and monitor power cables into the appropriate UPS outlets. In this lab, your task is to: > Add a UPS to your computer: > Plug the UPS into the wall outlet and turn it on. The battery included with the UPS provides backup power in case the main power is lost. A UPS protects against over- and under-voltage conditions. You need to add a UPS to the workstation and monitor in Office 1 so that work can be saved in the event of an outage. The power company informed you that there may be short interruptions to the electrical service that could last up to 15 minutes. The area around your office complex is under construction. You are the IT administrator for a small corporate network. > There are no more tickets to be processed. > From the top of the ticket: ~ Select Closed. > Select the + (plus sign) to add the comment. > In the New Comment field, for the open ticket, add a comment to indicate that the printer has been installed. > Under IT Administration, select ITAdmin. > From the upper left, select Floor 1 Overview. Add a comment to the ticket and close the ticket. > Under Printer preferences, for Let Windows manage my default printer, slide the button to Off. > From the right pane, select Printers & scanners. > Right-click Start and then select Settings. > On the monitor, select Click to view Windows 11. Verify the installation and set the printer as the default printer. ~ Drag the Power Adapter, AC connector to an AC power port on the wall outlet or power strip. > From the Selected Component pane: ~ Drag the Power Adapter, DC connector to the port on the back of the printer. > Under Shelf, select Power Adapter for HP. ~ Drag the USB Type A Connector to a USB port on the back of the computer. > From the Selected Component pane: ~ Drag the USB Type B Connector to the port on the back of the printer. > Above the printer, select Back and examine the connection ports.Under Shelf, expand Cables. > Above the computer, select Back to switch to the back view of the computer. > Drag the HP Photosmart Plus printer to the Workspace. > Identify the printer that best meets the scenario's requirements. > Repeat steps 2d - 2e for each remaining printer. > Read the description for the printer and then close the dialog. > For a printer, select Details and then select the Specifications tab. Identify the appropriate printer based on the scenario and move it to the Workspace. > Leave the ticket maximized so you can see the details. > Select ticket #20 and determine the best course of action. > Maximize the window for better viewing. > Select the power button to verify that the computer boots into Windows.įrom ITAdmin, determine the needs and possible fixes for Gerry's help desk ticket. > Above the computer, select Front to switch to the front view of the computer. > From the Selected Component pane, verify that the Connector, Fan, CPU 4-pin is still connected to the motherboard. > From the Workspace, drag the Heat Sink and Fan to the motherboard. > From the Shelf, drag the new CPU, AMD AM3 to the CPU socket on the motherboard. > Drag the CPU that's currently installed on the motherboard to the Shelf to remove it from the computer. ![]() > Drag the Heat Sink and Fan to the Workspace. > Because everything is connected properly, you will need to replace the CPU. > From the Selected Component pane, verify that the Connector, Fan, CPU 4-pin power connector is connected to the motherboard. Verify that all CPU power cables are connected. > Identify the location of the CPU fan connector. > Read the motherboard documentation to identify additional requirements for the CPU. > From the Selected Component pane, select Details. > From the Selected Component pane, identify the socket type for the motherboard. > Above the computer, select Motherboard to switch to the motherboard view of the computer. Select the power button to start the computer.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |